GYFTZ
This was a beautiful sign! The main panel was 1/2"-
thick aluminum. The letters were cut through and
given a 3-D bevel. The bow at the top and the wall
standard were also 1/2"-thick aluminum. The bow
also received a bevel. The horizontal bar was 1" X 1"
square aluminum tubing. Finally, four stainless
threaded rods with aluminum sleeves held the sign in
place.
Everything was powder-coated black by Advanced
Powder Coating. The sign panel was then given three
or four coats of Gold-to-Silver Harlequin paint,
followed by two coats of Matthews Gloss Clear with a
heavy dose of Copper Pearl mixed in.
This is one of those signs which a photo can do no
justice to.
This job was designed by:
Terry Kane - Orlando
407-649-8730 www.tkorlando.com